PIC32MX795F512L-80I/PT 32bit Microcontrollers MCU 512KB Flash 128KB USB ENET
♠ wehewehe huahana
| Huahana Huahana | Waiwai Hiʻona |
| Mea hana: | Microchip |
| Māhele Huahana: | 32-bit Microcontrollers - MCU |
| RoHS: | Nā kikoʻī |
| moʻo: | PIC32MX7xx |
| Kāila kau ʻana: | SMD/SMT |
| Pūʻolo / hihia: | TQFP-100 |
| kumu: | MIPS32 M4K |
| Ka nui o ka hoʻomanaʻo papahana: | 512 kB |
| Nui ʻikepili RAM: | 128 kB |
| ʻIkepili kaʻaahi laula: | 32 bit |
| Hoʻoholo ADC: | 10 bit |
| Ka nui o ka uaki: | 80 MHz |
| Ka helu o nā I/Os: | 85 I/O |
| Voltage Hoʻolako - Min: | 2.3 V |
| Voltage Hoʻolako - Max: | 3.6 V |
| Mahana hana liʻiliʻi loa: | - 40 C |
| ʻO ka wela hoʻohana kiʻekiʻe loa: | + 85 C |
| Packaging: | pā |
| Brand: | ʻenehana Microchip / Atmel |
| ʻAno RAM ʻikepili: | RAM |
| Kiʻekiʻe: | 1 mm |
| ʻAno Interface: | CAN, I2C, SPI, UART, USB |
| Ka lōʻihi: | 12 mm |
| ʻAi ʻoluʻolu: | ʻAe |
| Ka helu o nā kaha ADC: | 16 Kanal |
| Ka helu o nā hola / helu: | 5 Manawa |
| Pūʻina hana: | PIC32MX7 |
| Huahana: | MCU |
| ʻAno Huahana: | 32-bit Microcontrollers - MCU |
| ʻAno hoʻomanaʻo papahana: | Flash |
| Ka nui o ka waihona hale hana: | 119 |
| Māhele ʻāpana: | Nā Microcontrollers - MCU |
| inoa kalepa: | MIPS32 |
| Nā hola kiaʻi: | ʻO ka manawa kiaʻi |
| laula: | 12 mm |
| Huina Weight: | 0.023175 oz |
Nā Kūlana Hana
• 2.3V a 3.6V, -40ºC a +105ºC, DC i 80 MHzKoko: 80 MHz/105 DMIPS MIPS32® M4K®
• MIPS16e® mode no ka 40% liʻiliʻi liʻiliʻi code nui
• Ka hoʻolālā code-efficient (C a me Assembly).
• Hoʻonui ka pōʻai hoʻokahi (MAC) 32×16 a me 32x32 hoʻonui ʻelua
Hooponopono Uaki
• 0.9% oscillator kūloko (ma kekahi mau ʻokoʻa)
• Nā PLL hiki ke hoʻolālā a me nā kumu wati oscillator
• Hoʻopaʻa Paʻa Paʻa ʻole (FSCM)
• Ka Manawa Kiai Kuokoa
• Ala wikiwiki a hoʻomaka
Mana Mana
• Nā ʻano hoʻokele mana haʻahaʻa (Sleep and Idle)
• Hoʻohui hou i ka mana, hoʻihoʻi ʻia ʻo Brown-out
• 0.5 mA/MHz o kēia manawa (ma'amau)
• 41 µA IPD o kēia manawa (maʻamau)
Nā hiʻohiʻona kiʻi
• Kiʻi kiʻi waho me ka 34 Parallel MasterNā pine awa (PMP):
- Interface i waho kiʻi hoʻoponopono
- Hiki ke hoʻokele LCD pololei me DMA ahoʻomanaʻo i loko a i waho paha
Nā hiʻohiʻona analog
• Module ADC:
- 10-bit 1 Msps rate me hoʻokahi Laʻana a paʻa (S&H)
- 16 mea hoʻokomo analog
- Hiki ke hana i ka wā hiamoe
• Nā kumu hoʻoulu ADC maʻalahi a kūʻokoʻa
• Nā mea hoʻohālikelike:
- ʻElua mau modula hoʻohālikelike hoʻokomo pālua
- Nā kuhikuhi papahana me nā helu 32 voltage
Hoʻohālikelike Hoʻohālikelike / Hoʻokomo Hoʻokomo
• Elima Manawa Manawa Nui:
- ʻElima 16-bit a hiki i ʻelua 32-bit Timers/Counter
• 'Elima Output Compare (OC) modules
• ʻElima mau mea hoʻokomo hopu (IC).
• ʻO ka uaki manawa maoli a me ke kalena (RTCC).
Nā Kūlana Kūkākūkā
• USB 2.0-hoʻokō piha-Speed OTG mana
• 10/100 Mbps Ethernet MAC me MII a me RMII interface
• CAN module:
- 2.0B Active me ke kākoʻo ʻōlelo a DeviceNet™
• ʻEono UART modules (20 Mbps):
- Kākoʻo i nā protocols LIN 2.1 a me ke kākoʻo IrDA®
• A hiki i ʻehā 4-wire SPI modules (25 Mbps)
• A hiki i ʻelima mau modula I2C (hiki i ka 1 Mbaud) me SMBuskākoʻo
• Awa Kumu Kūlike (PMP)
Loaʻa i ka hoʻomanaʻo pololei (DMA)
• A hiki i ewalu mau ala o ka lako DMA me ka 'akomiʻike nui ʻikepili
• 32-bit Programmable Cyclic Redundancy Check (CRC)
• ʻEono mau ala hou i hoʻolaʻa ʻia no USB, Ethernet a meCAN modules
Hoʻokomo/Hoʻopuka
• 15 mA a i ʻole 10 mA kumu / poho no ka maʻamau VOH / VOL a mea hiki i ka 22 mA no ka VOH1 maʻamau
• nā pine hoʻomanawanui 5V
• Hiki ke koho ʻia i nā kahawai hāmama a me nā huki huki
• Nā hoʻopau waho
Kākoʻo Papa B
• Hale Waihona Puke Palekana B, IEC 60730Kākoʻo Hoʻomohala Debugger
• In-circuit and in-application programming
• 4-wire MIPS® Hoʻonui JTAG interface
• Papahana palena ʻole a me ʻeono mau ʻikepili paʻakikī
• IEEE 1149.2-compatible (JTAG) palena palena
