STM32F767ZIT6 ARM Microcontrollers – MCU hana kiʻekiʻe & DSP FPU, Arm Cortex-M7 MCU 2 Mbytes o Flash 216 MHz CPU, Art
♠ wehewehe huahana
| Huahana Huahana | Waiwai Hiʻona |
| Mea hana: | STMicroelectronics |
| Māhele Huahana: | ARM Microcontrollers - MCU |
| RoHS: | Nā kikoʻī |
| moʻo: | STM32F767ZI |
| Kāila kau ʻana: | SMD/SMT |
| Pūʻolo / hihia: | LQFP-144 |
| kumu: | ARM Cortex M7 |
| Ka nui o ka hoʻomanaʻo papahana: | 2 MB |
| ʻIkepili kaʻaahi laula: | 32 bit |
| Hoʻoholo ADC: | 3 x 12 bit |
| Ka nui o ka uaki: | 216 MHz |
| Ka helu o nā I/Os: | 114 I/O |
| Nui ʻikepili RAM: | 532 kB |
| Voltage Hoʻolako - Min: | 1.7 V |
| Voltage Hoʻolako - Max: | 3.6 V |
| Mahana hana liʻiliʻi loa: | - 40 C |
| ʻO ka wela hoʻohana kiʻekiʻe loa: | + 85 C |
| Packaging: | pā |
| Analog Supply Voltage: | 3.3 V |
| Brand: | STMicroelectronics |
| Hoʻoholo DAC: | 12 bit |
| ʻAno RAM ʻikepili: | SRAM |
| Voltage I/O: | 3.3 V |
| ʻAno Interface: | CAN, HDMI, I2C, I2S/SPI, SDMMC, SPDIFRX, UART/USART |
| ʻAi ʻoluʻolu: | ʻAe |
| Ka helu o nā kaha ADC: | 24 Kanal |
| Huahana: | MCU+FPU |
| ʻAno Huahana: | ARM Microcontrollers - MCU |
| ʻAno hoʻomanaʻo papahana: | Flash |
| Ka nui o ka waihona hale hana: | 360 |
| Māhele ʻāpana: | Nā Microcontrollers - MCU |
| inoa kalepa: | STM32 |
| Nā hola kiaʻi: | ʻO ka manawa kiaʻi |
| Huina Weight: | 0.091712 oz |
♠ Arm® Cortex®-M7 32b MCU+FPU, 462DMIPS, a hiki i 2MB Flash/ 512+16+4KB RAM, USB OTG HS/FS, 28 com IF, LCD, DSI
Hoʻokumu ʻia nā mea STM32F765xx, STM32F767xx, STM32F768Ax a me STM32F769xx ma luna o ka hana kiʻekiʻe Arm® Cortex®-M7 32-bit RISC core e hana ana a hiki i 216 MHz frequency.Hōʻike ka Cortex®-M7 i kahi ʻāpana lana lana (FPU) e kākoʻo ana i nā ʻōlelo aʻoaʻo a me nā ʻano ʻikepili i ka Arm® pālua a me ka pololei hoʻokahi.Hoʻokomo pū ia i kahi pūʻulu piha o nā ʻōlelo aʻoaʻo DSP a me kahi ʻāpana pale hoʻomanaʻo (MPU) e hoʻonui ai i ka palekana noi.
Hoʻokomo nā mea STM32F765xx, STM32F767xx, STM32F768Ax a me STM32F769xx i nā mea hoʻomanaʻo i hoʻokomo ʻia me ka hoʻomanaʻo Flash a hiki i 2 Mbytes, 512 Kbytes o SRAM (me 128 Kbytes o Data TCM RAM) o ka ʻikepili koʻikoʻi ʻo TCM KCM RAM no ka ʻikepili koʻikoʻi o ka manawa maoli. (no nā hana maʻamau koʻikoʻi), 4 Kbytes o ka SRAM hoʻihoʻi i loaʻa i nā ʻano mana haʻahaʻa haʻahaʻa, a me kahi ʻano nui o nā I/Os i hoʻonui ʻia a me nā peripheral pili i ʻelua mau kaʻa APB, ʻelua pahi AHB, kahi pahi multi-AHB 32-bit. matrix a me kahi multi layer AXI interconnect e kākoʻo ana i ka hoʻomanaʻo i loko a me waho.
• Core: Arm® 32-bit Cortex®-M7 CPU me DPFPU, ART Accelerator a me L1-cache: 16 Kbytes I/D cache, e ʻae ana i ka hoʻokō aupuni 0-kali mai Flash i hoʻokomo ʻia a me nā hoʻomanaʻo waho, a hiki i 216 MHz, MPU, 462 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1), a me nā kuhikuhi DSP.
• Hoʻomanaʻo
- A hiki i ka 2 Mbytes o ka hoʻomanaʻo Flash i hoʻonohonoho ʻia i ʻelua mau panakō e ʻae ana i ka heluhelu ʻana i ka wā kākau
- SRAM: 512 Kbytes (me 128 Kbytes o ka ʻikepili TCM RAM no ka ʻikepili koʻikoʻi manawa maoli) + 16 Kbytes o ke aʻo ʻana TCM RAM (no nā hana maʻamau koʻikoʻi) + 4 Kbytes o ka SRAM hoʻihoʻi.
- ʻO ka mea hoʻomanaʻo hoʻomanaʻo waho maʻalahi a hiki i ka 32-bit data bus: SRAM, PSRAM, SDRAM / LPSDR SDRAM, NOR / NAND hoʻomanaʻo.
• ʻO ke ʻano ʻelua Quad-SPI
• Kiʻi kiʻi
- ʻO Chrom-ART Accelerator (DMA2D), ka mea hoʻokele kiʻi kiʻi e hiki ai ke hoʻonui i ka mea hoʻohana kiʻi kiʻi.
- Lako JPEG codec
– Kākoʻo ka mana LCD-TFT a hiki i ka hoʻonā XGA
- MIPI® DSI hoʻokele hoʻokele e kākoʻo ana i ka hoʻonā 720p 30 Hz
• Uaki, hoʻoponopono a hoʻolako i ka hoʻokele
– 1.7 V a 3.6 V lako noi a me I/Os
– POR, PDR, PVD a me BOR
- Ka mana USB i hoʻolaʻa ʻia
– 4-a-26 MHz oscillator kristal
- ʻO RC i kālai ʻia i loko o ka hale hana 16 MHz (1% pololei
- 32 kHz oscillator no RTC me ka calibration
- 32 kHz RC kūloko me ka calibration
• mana haʻahaʻa
- Nā ʻano moe, hoʻomaha a me ke kūpaʻa
- Hāʻawi ʻo VBAT no RTC, 32 × 32 bit backup registers + 4 Kbytes backup SRAM
• 3×12-bit, 2.4 MSPS ADC: a hiki i 24 mau kaha
• Nā kānana kikohoʻe no ka modulator sigma delta (DFSDM), nā kaha 8 / 4 kānana
• 2×12-bit D/A mea hoʻololi
• DMA manaʻo nui: 16-stream DMA mea hoʻoponopono me FIFO a me ke kākoʻo pahū
• A hiki i 18 mau manawa: a hiki i ka 13-bit 16-bit (1x mana haʻahaʻa 16-bit manawa i loaʻa ma Stop mode) a me ʻelua 32-bit timers, kēlā me kēia me ka 4 IC/OC/PWM a i ʻole pulse counter a quadrature (incremental). ) hoʻokomo encoder.ʻO nā manawa 15 āpau e holo ana a hiki i 216 MHz.2x nā ʻīlio kiaʻi, SysTick timer
• ke ano debug
- Nā pilina SWD a me JTAG
– Cortex®-M7 Trace Macrocell™
• A hiki i 168 mau awa I/O me ka hiki ke hoopau
- A hiki i 164 wikiwiki I/Os a hiki i 108 MHz
– A hiki i ka 166 5 V-tolerant I/Os
• A hiki i 28 mau pilina pili
- A hiki i 4 mau pilina I2C (SMBus/PMBus)
- A hiki i 4 USARTs/4 UARTs (12.5 Mbit/s, ISO7816 interface, LIN, IrDA, mana modem)
- A hiki i 6 SPI (a hiki i 54 Mbit/s), 3 me muxed simplex I2S no ka leo
- 2 x SAI (nā leo leo serial)
- 3 × CAN (2.0B Active) a me 2x SDMMC
- SPDIFRX interface
– HDMI-CEC
- ke kikowaena kauā MDIO
• Hoʻohui kiʻekiʻe
- USB 2.0 piha-wikiwiki piha/host/OTG kaohi me ka ma-chip PHY
- USB 2.0 kiʻekiʻe-wikiwiki / piha-wikiwiki uila / host / OTG kaohi me ka DMA i hoʻolaʻa ʻia, ma ka chip PHY piha holoʻokoʻa a me ULPI
- 10/100 Ethernet MAC me ka DMA i hoʻolaʻa ʻia: kākoʻo i ka lako IEEE 1588v2, MII/RMII
• 8- a hiki i ka 14-bit pahupaʻiwikiō a hiki i 54 Mbyte/s
• Mea hoʻoheheʻe helu random maoli
• Helu helu CRC
• RTC: ka pololei subsecond, alemanaka lako
• 96-bit kū hoʻokahi ID
