STM32F413VHT6 ARM Microcontrollers MCU laina komo hana kiʻekiʻe, Arm Cortex-M4 kumu DSP & FPU, 1,5 MByte o Flash 1
♠ wehewehe huahana
| Huahana Huahana | Waiwai Hiʻona |
| Mea hana: | STMicroelectronics |
| Māhele Huahana: | ARM Microcontrollers - MCU |
| RoHS: | Nā kikoʻī |
| moʻo: | STM32F413VH |
| Kāila kau ʻana: | SMD/SMT |
| Pūʻolo / hihia: | LQFP-100 |
| kumu: | ARM Cortex M4 |
| Ka nui o ka hoʻomanaʻo papahana: | 1.5 MB |
| ʻIkepili kaʻaahi laula: | 32 bit |
| Hoʻoholo ADC: | 12 bit |
| Ka nui o ka uaki: | 100 MHz |
| Ka helu o nā I/Os: | 81 I/O |
| Nui ʻikepili RAM: | 320 kB |
| Voltage Hoʻolako - Min: | 1.7 V |
| Voltage Hoʻolako - Max: | 3.6 V |
| Mahana hana liʻiliʻi loa: | - 40 C |
| ʻO ka wela hoʻohana kiʻekiʻe loa: | + 85 C |
| Packaging: | pā |
| Analog Supply Voltage: | 1.7 V a 3.6 V |
| Brand: | STMicroelectronics |
| Hoʻoholo DAC: | 12 bit |
| ʻAno RAM ʻikepili: | SRAM |
| Voltage I/O: | 1.7 V a 3.6 V |
| ʻAno Interface: | CAN, I2C, I2S, LIN, SAI, SDIO, UART, USB |
| ʻAi ʻoluʻolu: | ʻAe |
| Ka helu o nā kaha ADC: | 16 Kanal |
| Huahana: | MCU+FPU |
| ʻAno Huahana: | ARM Microcontrollers - MCU |
| ʻAno hoʻomanaʻo papahana: | Flash |
| Ka nui o ka waihona hale hana: | 540 |
| Māhele ʻāpana: | Nā Microcontrollers - MCU |
| inoa kalepa: | STM32 |
| Nā hola kiaʻi: | ʻO ka manawa kiaʻi, puka makani |
| Huina Weight: | 0.024037 oz |
♠ Arm®-Cortex®-M4 32b MCU+FPU, 125 DMIPS, a hiki i 1.5MB Flash, 320KB RAM, USB OTG FS, 1 ADC, 2 DAC, 2 DFSDM
Hoʻokumu ʻia nā mea STM32F413XG/H i ka Arm® Cortex®-M4 32-bit kiʻekiʻe.Hana ʻia ka RISC core ma ke alapine a hiki i 100 MHz.ʻO kā lākou Cortex®-M4 mau hiʻohiʻona aFloating point unit (FPU) hoʻokahi pololei e kākoʻo ana i nā ʻōlelo aʻo a me nā ʻano ʻikepili āpau.Hoʻokomo pū ia i kahi hoʻonohonoho piha o nā kuhikuhi DSP akahi ʻāpana pale hoʻomanaʻo (MPU) e hoʻonui ai i ka palekana noi.
Aia nā mea STM32F413XG/H i nā laina huahana komo STM32F4 (me nā huahanaka hoʻohui ʻana i ka pono o ka mana, ka hana a me ka hoʻohui) ʻoiai e hoʻohui ana i kahi mea houhiʻona i kapa ʻia ʻo Batch Acquisition Mode (BAM) e ʻae ai e mālama i ka mana hou aʻeka hoʻohana ʻana i ka wā o ka hōʻiliʻili ʻikepili.
Hoʻokomo nā mea STM32F413XG/H i nā hoʻomanaʻo i hoʻokomo ʻia (a hiki i1.5 Mbytes o ka hoʻomanaʻo Flash, 320 Kbytes o SRAM), a me kahi ākea o ka hoʻonui ʻia.I/Os a me nā ʻaoʻao pili i ʻelua pahi APB, ʻekolu pahi AHB a me kahi 32-bit multi-AHBmatrix kaʻa.
Hāʻawi nā mea hana āpau i kahi 12-bit ADC, ʻelua 12-bit DAC, kahi RTC haʻahaʻa haʻahaʻa, ʻumikūmālua kumu nui.16-bit timers me ʻelua PWM timer no ka hoʻokele kaʻa, ʻelua mau manawa 32-bit kumu nui.a me kahi manawa mana haʻahaʻa.
Hāʻawi pū lākou i nā pilina kamaʻilio maʻamau a holomua.
• A hiki i ʻehā I2C, me hoʻokahi I2C e kākoʻo ana i ka Fast-Mode Plus
• Elima SPI
• Elima I2Ss mailoko mai o ia mea elua he duplex piha.No ka hoʻokō ʻana i ka pololei o ka papa leo, ʻo ka I2SHiki ke hoʻopaʻa ʻia nā peripherals ma o ka PLL leo kūloko a i ʻole ma o ka uaki wahoʻae i ka hoʻolikelike ʻana.
• ʻEhā USART a me ʻeono UART
• He polokalamu SDIO/MMC
• He USB 2.0 OTG piha-wikiwiki
• Ekolu KANI
• He SAI.
Eia kekahi, hoʻokomo nā mea STM32F413xG/H i nā peripheral holomua:
• He kikowaena hoʻomanaʻo hoʻomanaʻo maʻalahi (FSMC)
• He pānaʻi hoʻomanaʻo Quad-SPI
• ʻElua kānana kikohoʻe no ka modulator sigma (DFSDM) e kākoʻo ana i nā microphone MEM a meka hoʻopili ʻana i ke kumu kani, hoʻokahi me ʻelua kānana a hiki i ʻehā mau hoʻokomo, a ʻo ka luahoʻokahi me ʻehā kānana a hiki i ka ʻewalu hoʻokomo
Hāʻawi ʻia lākou i nā pūʻulu 7 mai ka 48 a i ka 144 pins.ʻO ka hoʻonohonoho o nā peripheral i loaʻapili i ka pūʻolo i koho ʻia.Hoʻohana ka STM32F413xG/H i ka - 40 a + 125 °Cka wela wela mai ka 1.7 (PDR OFF) a i ka 3.6 V mana lako.He pūʻulu piha oʻAe ke ʻano mālama mana i ka hoʻolālā ʻana i nā noi haʻahaʻa.
• Laina Hana Hoʻoikaika ikaika me ka eBAM (hoʻonuiʻO ke ʻano o ka loaʻa ʻana o ka hui)
– 1.7 V a i ka 3.6 V mana lako
– -40 °C a hiki i 85/105/125 °C pae wela
• Core: Arm® 32-bit Cortex®-M4 CPU me FPU,Adaptive manawa maoli accelerator (ARTAccelerator™) e ʻae ana i ka hoʻokō mokuʻāina 0-kalimai ka hoʻomanaʻo Flash, alapine a hiki i 100 MHz,ʻāpana pale hoʻomanaʻo, 125 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), a me DSPkuhikuhi
• Hoʻomanaʻo
- A hiki i 1.5 Mbytes o ka hoʻomanaʻo Flash
- 320 Kbytes o SRAM
– Hoʻoponopono hoʻomanaʻo hoʻomanaʻo static wahoa hiki i ka 16-bit data bus: SRAM, PSRAM,NOR Flash memo
- ʻElua mode Quad-SPI interface
• LCD like like, 8080/6800 modes
• Uaki, hoʻoponopono a hoʻolako i ka hoʻokele
– 1.7 a 3.6 V lako noi a me I/Os
– POR, PDR, PVD a me BOR
– 4-a-26 MHz oscillator kristal
- ʻO RC i kālai ʻia i loko o ka hale hana 16 MHz
- 32 kHz oscillator no RTC me ka calibration
- 32 kHz RC kūloko me ka calibration
• Hoʻohana mana
– Holo: 112 µA/MHz (pili ʻia)
- Kāohi (Flash in Stop mode, wakeup wikiwikimanawa): 42 µA Typ.;80 µA max @25 °C
- Kāohi (Flash i ke ʻano hoʻohaʻahaʻa mana hohonu,manawa ho'āla lohi): 15 µA Typ.;46 µA max @25 °C
– Kūkū me ka ʻole o ka RTC: 1.1 µA Typ.;14.7 µA ka nui ma @85 °C
– Hāʻawi VBAT no RTC: 1 µA @25 °C
• 2×12-bit D/A mea hoʻololi
• 1×12-bit, 2.4 MSPS ADC: a hiki i 16 mau kaha
• 6x kikohoʻe kānana no ka sigma delta modulator,12x PDM pili, me ka stereo microphonea me ke kākoʻo localization kumu kani
• DMA kumu nui: 16-stream DMA
• A hiki i ka 18 mau manawa: a hiki i ka ʻumikūmālua 16-bit timers, ʻelua32-bit timers a hiki i 100 MHz i kēlā me kēia me kaʻehā IC/OC/PWM a i ʻole ka helu pulse aquadrature (incremental) hoʻokomo encoder, ʻeluanā manawa kiaʻi (kūʻokoʻa a me ka puka makani),
hoʻokahi manawa SysTick, a me kahi manawa mana haʻahaʻa
• ke ano debug
- Debug uea Serial (SWD) & JTAG
– Cortex®-M4 Hoʻopili ʻia ʻo Trace Macrocell™
• A hiki i 114 mau awa I/O me ka hiki ke hoopau
- A hiki i 109 wikiwiki I/Os a hiki i 100 MHz
– A hiki i ka 114 elima V-tolerant I/Os
• A hiki i 24 mau pilina pili
- A hiki i ka 4x I2C interfaces (SMBus/PMBus)
- A hiki i 10 UARTS: 4 USART / 6 UART(2 x 12.5 Mbit/s, 2 x 6.25 Mbit/s), ISO 7816interface, LIN, IrDA, mana modem)
- A hiki i 5 SPI/I2Ss (a hiki i 50 Mbit/s, SPI a i ʻoleI2S leo protocol), mai loko mai o 2 muxednā kikowaena I2S piha-duplex
– SDIO interface (SD/MMC/eMMC)
- Hoʻohui kiʻekiʻe: USB 2.0 piha-wikiwikimea hoʻokele/host/OTG me ka PHY
– 3x CAN (2.0B Active)
– 1xSAI
• Mea hoʻoheheʻe helu random maoli
• Helu helu CRC
• 96-bit kū hoʻokahi ID
• RTC: ka pololei subsecond, alemanaka lako
• ʻO ECOPACK®2 nā pūʻolo a pau
• kaʻa kaʻa a me ka mana noi
• Lapaau lapaau
• Nā noi hana: PLC, inverters, circuit breakers
• Nā mea paʻi, a me nā mīkini paʻi
• Pūnaehana alarm, intercom wikiō, a me HVAC
• Nā lako leo home
• Kekahi kelepona paʻalima
• Nā mea hiki ke komo
• Nā mea pili
• Wifi modules
