STM32F410RBT6 ARM Microcontrollers MCU STM32 Dynamic Efficiency MCU BAM
♠ wehewehe huahana
| Huahana Huahana | Waiwai Hiʻona |
| Mea hana: | STMicroelectronics |
| Māhele Huahana: | ARM Microcontrollers - MCU |
| RoHS: | Nā kikoʻī |
| moʻo: | STM32F410RB |
| Kāila kau ʻana: | SMD/SMT |
| Pūʻolo / hihia: | LQFP-64 |
| kumu: | ARM Cortex M4 |
| Ka nui o ka hoʻomanaʻo papahana: | 128 kB |
| ʻIkepili kaʻaahi laula: | 32 bit |
| Hoʻoholo ADC: | 12 bit |
| Ka nui o ka uaki: | 100 MHz |
| Ka helu o nā I/Os: | 50 I/O |
| Nui ʻikepili RAM: | 32 kB |
| Voltage Hoʻolako - Min: | 1.7 V |
| Voltage Hoʻolako - Max: | 3.6 V |
| Mahana hana liʻiliʻi loa: | - 40 C |
| ʻO ka wela hoʻohana kiʻekiʻe loa: | + 85 C |
| Packaging: | pā |
| Brand: | STMicroelectronics |
| Hoʻoholo DAC: | 12 bit |
| ʻAno RAM ʻikepili: | SRAM |
| Kiʻekiʻe: | 10 mm |
| ʻAno Interface: | I2C, SPI, USART |
| Ka lōʻihi: | 10 mm |
| ʻAi ʻoluʻolu: | ʻAe |
| Ka helu o nā kaha ADC: | 1 Kanal |
| Ka helu o nā hola / helu: | 9 Ka manawa |
| Pūʻina hana: | ARM Cortex |
| Huahana: | MCU+FPU |
| ʻAno Huahana: | ARM Microcontrollers - MCU |
| ʻAno hoʻomanaʻo papahana: | Flash |
| Ka nui o ka waihona hale hana: | 960 |
| Māhele ʻāpana: | Nā Microcontrollers - MCU |
| inoa kalepa: | STM32 |
| Nā hola kiaʻi: | ʻO ka manawa kiaʻi |
| laula: | 1.6 mm |
| Huina Weight: | 0.012088 oz |
♠ Arm®-Cortex®-M4 32b MCU+FPU, 125 DMIPS, 128KB Flash, 32KB RAM, 9 TIMs, 1 ADC, 1 DAC, 1 LPTIM, 9 comm.interfaces
Hoʻokumu ʻia nā hāmeʻa STM32F410X8/B i ka Arm® Cortex® -M4 32-bit kiʻekiʻe.Hana ʻia ka RISC core ma ke alapine a hiki i 100 MHz.ʻO kā lākou Cortex®-M4 mau hiʻohiʻona aFloating point unit (FPU) hoʻokahi pololei e kākoʻo ana i nā ʻōlelo aʻo a me nā ʻano ʻikepili āpau.Hoʻokomo pū ia i kahi hoʻonohonoho piha o nā kuhikuhi DSP akahi ʻāpana pale hoʻomanaʻo (MPU) e hoʻonui ai i ka palekana noi.
Aia ka STM32F410X8/B i ka laina huahana STM32 Dynamic Efficiency ™ (menā huahana e hui pū ana i ka pono o ka mana, ka hana a me ka hoʻohui) me ka hoʻohui ʻana i kahi mea houʻO kahi hiʻohiʻona hou i kapa ʻia ʻo Batch Acquisition Mode (BAM) e ʻae ai e mālama i ka mana hou aʻeka hoʻohana ʻana i ka wā o ka hōʻiliʻili ʻikepili.
Hoʻokomo ka STM32F410X8/B i nā hoʻomanaʻo i hoʻokomo ʻia (a hiki i 128 Kbytes oHoʻomanaʻo uila, 32 Kbytes o SRAM), a me kahi ākea o nā I/Os i hoʻonui ʻia a mepili i nā kaʻa kaʻa APB ʻelua, hoʻokahi kaʻa AHB a me kahi matrix bus 32-bit multi-AHB.
Hāʻawi nā mea hana āpau i hoʻokahi 12-bit ADC, hoʻokahi 12-bit DAC, kahi RTC haʻahaʻa haʻahaʻa, ʻekolu kumu nui.16-bit timers, hoʻokahi PWM timer no ka hoʻokele kaʻa, hoʻokahi kumu nui 32-bit timers a hoʻokahi16-bit ka mana haʻahaʻa.Hāʻawi pū lākou i nā pilina kamaʻilio maʻamau a holomua.
• A hiki i ekolu I2C
• Ekolu SPI
• Ekolu I2S
No ka hoʻokō ʻana i ka pololei o ka papa leo, hiki ke hoʻopaʻa ʻia nā peripheral I2S ma o ka kūlokoPLL a i ʻole ma ka uaki waho e ʻae i ka hoʻonohonoho ʻana.
• Ekolu USART.
Hāʻawi ʻia ka STM32F410x8/B i 5 mau pūʻolo mai 36 a 64 mau pine.ʻO ka hoʻonohonoho opili nā peripheral i loaʻa ma ka pūʻolo i koho ʻia.
Hoʻohana ka STM32F410x8/B i ka - 40 a + 125 °C wela wela mai kahi 1.7 (PDR).OFF) i ka lako mana 3.6 V.ʻO kahi hoʻonohonoho piha o ke ʻano hoʻopakele mana hiki ke hoʻolālāo na noi haahaa.
Hana kēia mau hiʻohiʻona i nā microcontrollers STM32F410x8/B i kūpono no kahi ākeanā noi:
• kaʻa kaʻa a me ka mana noi
• Lapaau lapaau
• Nā noi hana: PLC, inverters, circuit breakers
• Nā mea paʻi, a me nā mīkini paʻi
• Pūnaehana alarm, intercom wikiō, a me HVAC
• Nā lako leo home
• Kekahi kelepona paʻalima
• Laina Hana Hoʻoikaika ikaika me ka eBAM (hoʻonuiʻO ke ʻano o ka loaʻa ʻana o ka hui)
– 1.7 V a i ka 3.6 V mana lako
– -40 °C a hiki i 85/105/125 °C pae wela
• Core: Arm® 32-bit Cortex®-M4 CPU me FPU,Adaptive manawa maoli accelerator (ARTAccelerator™) e ʻae ana i ka hoʻokō mokuʻāina 0-kalimai ka hoʻomanaʻo Flash, alapine a hiki i 100 MHz,ʻāpana mālama hoʻomanaʻo,125 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1),a me nā kuhikuhi DSP
• Hoʻomanaʻo
- A hiki i 128 Kbytes o ka hoʻomanaʻo Flash
- 512 bytes o ka hoʻomanaʻo OTP
– 32 Kbytes o SRAM
• Uaki, hoʻoponopono a hoʻolako i ka hoʻokele
– 1.7 V a 3.6 V lako noi a me I/Os
– POR, PDR, PVD a me BOR
– 4-a-26 MHz oscillator kristal
- ʻO RC i kālai ʻia i loko o ka hale hana 16 MHz
- 32 kHz oscillator no RTC me ka calibration
- 32 kHz RC kūloko me ka calibration
• Hoʻohana mana
– Holo: 89 µA/MHz (pili ʻia)
- Kāohi (Flash in Stop mode, wakeup wikiwikimanawa): 40 µA Typ @ 25 °C;49 µA max@25 °C
- Kāohi (Flash i ke ʻano hoʻohaʻahaʻa mana hohonu,manawa ala ala lohi): iho i 6 µA @ 25 °C;14 µA max @25 °C
– Kū mau: 2.4 µA @25 °C / 1.7 V me ka ʻoleRTC;12 µA @85 °C @1.7 V
– Hāʻawi VBAT no RTC: 1 µA @25 °C
• 1×12-bit, 2.4 MSPS ADC: a hiki i 16 mau kaha
• 1×12-bit D/A mea hoʻololi
• DMA kumu nui: 16-stream DMAnā mea hoʻoponopono me nā FIFO a me ke kākoʻo pahū
• A hiki i 9 manawa
- Hoʻokahi manawa mana haʻahaʻa (loaʻa ma Stopʻano)
- Hoʻokahi 16-bit kiʻekiʻe kiʻekiʻe ka mana kaʻa kaʻa
- ʻEkolu 16-bit mau manawa maʻamau
- Hoʻokahi manawa 32-bit a hiki i 100 MHz a hiki iʻehā IC/OC/PWM a i ʻole ka helu pulse aquadrature (incremental) hoʻokomo encoder
- ʻElua mau manawa kiaʻi kiaʻi (kūʻokoʻapukaaniani)
- ʻO ka manawa SysTick.
• ke ano debug
- Debug uea Serial (SWD) & JTAGinterfaces
– Cortex® -M4 Hoʻopili ʻia ʻo Trace Macrocell™
• He 50 mau awa I/O me ka hiki ke hoopau
- A hiki i 45 wikiwiki I/Os a hiki i 100 MHz
– A hiki i ka 49 5 V-tolerant I/Os
• A hiki i 9 mau pilina pili
- A hiki i 3x I2C mau pilina (SMBus/PMBus)me 1x I2C Fast-mode ma 1 MHz
- A hiki i 3 USARTs (2 x 12.5 Mbit/s,1 x 6.25 Mbit/s), ʻokoʻa ISO 7816, LIN,IrDA, mana modem)
- A hiki i 3 SPI/I2Ss (a hiki i 50 Mbit/s SPI a i ʻoleI2S leo protocol)
• Mea hoʻoheheʻe helu random maoli
• Helu helu CRC
• 96-bit kū hoʻokahi ID
• RTC: ka pololei subsecond, alemanaka lako
• ʻO ECOPACK®2 nā pūʻolo a pau
