ST7FLITE05Y0M6 8-bit Microcontrollers – MCU Flash 1.5K SPI Intrf
♠ wehewehe huahana
| Huahana Huahana | Waiwai Hiʻona |
| Mea hana: | STMicroelectronics |
| Māhele Huahana: | 8-bit Microcontrollers - MCU |
| RoHS: | Nā kikoʻī |
| moʻo: | ST7LITE05Y0 |
| Kāila kau ʻana: | SMD/SMT |
| Pūʻolo / hihia: | SOIC-16 |
| kumu: | ST7 |
| Ka nui o ka hoʻomanaʻo papahana: | 1.5 kB |
| ʻIkepili kaʻaahi laula: | 8 bit |
| Hoʻoholo ADC: | 8 bit |
| Ka nui o ka uaki: | 8 MHz |
| Ka helu o nā I/Os: | 13 I/O |
| Nui ʻikepili RAM: | 128 B |
| Voltage Hoʻolako - Min: | 2.4 V |
| Voltage Hoʻolako - Max: | 5.5 V |
| Mahana hana liʻiliʻi loa: | - 40 C |
| ʻO ka wela hoʻohana kiʻekiʻe loa: | + 85 C |
| Packaging: | Paipu |
| Brand: | STMicroelectronics |
| Nui ʻikepili ROM: | 128 B |
| ʻAno ROM ʻikepili: | Flash |
| Kiʻekiʻe: | 1.65 mm |
| ʻAno Interface: | SPI |
| Ka lōʻihi: | 10 mm |
| ʻAi ʻoluʻolu: | ʻAe |
| Ka helu o nā kaha ADC: | 5 Kanal |
| Ka helu o nā hola / helu: | 2 Manawa |
| Pūʻina hana: | ST7FLITE0x |
| ʻAno Huahana: | 8-bit Microcontrollers - MCU |
| ʻAno hoʻomanaʻo papahana: | Flash |
| Ka nui o ka waihona hale hana: | 1000 |
| Māhele ʻāpana: | Nā Microcontrollers - MCU |
| laula: | 4 mm |
| Huina Wehe: | 0.007079 oz |
♠ 8-bit microcontroller me ka hoʻomanaʻo Flash uila hoʻokahi, ʻikepili EEPROM, ADC, timers, SPI
ʻO ka ST7LITE0x a me ST7SUPERLITE (ST7LITESx) nā lālā o ka ʻohana microcon-troller ST7. Hoʻokumu ʻia nā hāmeʻa ST7 āpau ma kahi ʻoihana maʻamau 8-bit core, e hōʻike ana i kahi hoʻonohonoho aʻo i hoʻonui ʻia.
Hōʻike ka ST7LITE0x a me ST7SUPERLITE i ka hoʻomanaʻo FLASH me ka mana byte-by-byte In-Circuit Programming (ICP) a me In-Application Programming (IAP).
Ma lalo o ka mana lako polokalamu, hiki ke hoʻokomo ʻia nā mea ST7LITE0x a me ST7SUPERLITE ma ke ʻano WAIT, SLOW, a i ʻole HALT, e hōʻemi ana i ka hoʻohana ʻana i ka mana i ka wā i hoʻohana ʻole ʻia a i ʻole ke kūlana standby.
ʻO ka hoʻonohonoho aʻo i hoʻonui ʻia a me nā ʻano hoʻoponopono ʻana o ka ST7 e hāʻawi i ka mana a me ka maʻalahi i nā mea hoʻomohala polokalamu, e hiki ai ke hoʻolālā i ka code noi noi kūpono loa. Ma waho aʻe o ka hoʻokele ʻikepili 8-bit maʻamau, hōʻike ʻia nā mea hoʻokele micro ST7 āpau i ka hoʻopunipuni bit ʻoiaʻiʻo, 8x8 un signed multiplication a indirect addressing modes.
■ Hoomanao
- 1K a i ʻole 1.5 Kbytes hoʻokahi volta Flash Program memo me ka pale heluhelu-waho, In-Circuit and In-Application Programming (ICP a me IAP). 10 K kākau/holo ʻia nā pōʻaiapili, mālama ʻikepili: 20 makahiki ma 55 °C.
- 128 bytes RAM.
- 128 bytes data EEPROM me ka palekana heluhelu. 300K kākau a holoi ʻia nā pōʻai, mālama ʻikepili: 20 mau makahiki ma 55 °C.
■ Uaki, Ho'oponopono hou a me ka hooponopono lako
– 3-level low voltage supervisor (LVD) a me auxiliary voltage detector (AVD) no ka palekana mana-on/off kaʻina.
- Nā kumu wati: 1MHz RC 1% oscillator a i ʻole uaki waho
- PLL x4 a i ʻole x8 no 4 a i ʻole 8 MHz uaki kūloko
- ʻEhā mau ʻano mālama mana: Halt, Active-Halt, Kali a lohi
■ Hooponopono hoopau
- 10 mau mea hoʻopiʻi hoʻopili me TRAP a me RESET
- 4 laina interrupt waho (ma 4 vectors)
■ Na Awa I/O
- 13 mau laina I/O bidirectional multifunctional
- 9 mau laina hana ʻokoʻa
- 6 mau mea hoʻoiho kiʻekiʻe
■ 2 Manawa
- Hoʻokahi 8-bit Lite Timer (LT) me ka prescaler e komo pū ana: kiaʻi, 1 kumu manawa maoli a me 1 hopu hopu.
- Hoʻokahi 12-bit Auto-reload Timer (AT) me ka hana hoʻohālikelike a me ka PWM
■ 1 Hoikeike
- SPI hoʻokaʻawale serial interface
■ A/D Hoololi
- 8-bit hoʻonā no 0 i VDD
- Loaʻa paʻa iā Op-amp no ka hoʻonā 11-bit ma 0 a 250 mV pae (@ 5V VDD)
– 5 mau ala komo
■ Papa kuhikuhi
– 8-bit ka hoʻoponopono ʻikepili
- 63 mau ʻōlelo aʻoaʻo me ka ʻike ʻole opcode
- 17 mau ʻano ʻōlelo nui
– 8 x 8 unsigned multiply aʻo
■ Mea Hana Hooulu
– Pūʻolo hoʻomohala lako lako lako polokalamu
