S9KEAZN64AVLCR ARM Microcontrollers – MCU KINETIS E SERIES 64K FLASH 4K RAM 40MHz 32LQFP
♠ wehewehe huahana
| Huahana Huahana | Waiwai Hiʻona |
| Mea hana: | NXP |
| Māhele Huahana: | ARM Microcontrollers - MCU |
| moʻo: | KEA64 |
| Kāila kau ʻana: | SMD/SMT |
| Pūʻolo / hihia: | LQFP-32 |
| kumu: | ARM Cortex M0+ |
| Ka nui o ka hoʻomanaʻo papahana: | 64 kB |
| ʻIkepili kaʻaahi laula: | 32 bit |
| Hoʻoholo ADC: | 12 bit |
| Ka nui o ka uaki: | 40 MHz |
| Ka helu o nā I/Os: | 28 I/O |
| Nui ʻikepili RAM: | 4 kB |
| Voltage Hoʻolako - Min: | 2.7 V |
| Voltage Hoʻolako - Max: | 5.5 V |
| Mahana hana liʻiliʻi loa: | - 40 C |
| ʻO ka wela hoʻohana kiʻekiʻe loa: | + 105 C |
| Packaging: | Reel |
| Analog Supply Voltage: | 2.7 V a 5.5 V |
| Brand: | NXP Semiconductors |
| Hoʻoholo DAC: | 6 bit |
| ʻAno RAM ʻikepili: | SRAM |
| Nui ʻikepili ROM: | 256 B |
| ʻAno ROM ʻikepili: | EEPROM |
| ʻAno Interface: | I2C, SPI, UART |
| ʻAi ʻoluʻolu: | ʻAe |
| Ka helu o nā kaha ADC: | 16 Kanal |
| Huahana: | MCU |
| ʻAno Huahana: | ARM Microcontrollers - MCU |
| ʻAno hoʻomanaʻo papahana: | Flash |
| Ka nui o ka waihona hale hana: | 2000 |
| Māhele ʻāpana: | Nā Microcontrollers - MCU |
| Nā hola kiaʻi: | ʻO ka manawa kiaʻi |
| Māhele # Aliases: | 935324986528 |
• Nā hiʻohiʻona hana
– Ka nui o ka uila: 2.7 a 5.5 V
- Ka helu uila kākau uila: 2.7 a 5.5 V
– Ka wela wela (ambient): -40 a 125°C
• ka hana
- A hiki i ka 40 MHz Arm® Cortex-M0+ kumu a hiki i ka 20 MHz uaki kaʻa.
– Hoʻokahi pōʻaiapuni 32-bit x 32-bit multiplier
– Hoʻokahi pōʻaiapuni I/O komo awa
• Nā hoʻomanaʻo a me nā pilina hoʻomanaʻo
- A hiki i ka 64 KB flash
– A hiki i 256 B EEPROM
- A hiki i ka 4 KB RAM
• Uaki
- Oscillator (OSC) - kākoʻo i ka kristal 32.768 kHz a i ʻole 4 MHz a 20 MHz kristal a i ʻole resonator ceramic;koho o ka mana haʻahaʻa a i ʻole nā oscillators kiʻekiʻe
– Puna o ka uaki kūloko (ICS) – FLL i loko me ka hōʻike i loko a i waho paha, 31.25 kHz i hoʻopaʻa mua ʻia i loko no ka ʻōnaehana 40 MHz a me ka uaki kumu.
– Loko 1 kHz mana haʻahaʻa oscillator (LPO)
• Nā kikowaena pūnaewele
- Module hoʻokele mana (PMC) me ʻekolu mau ʻano mana: Holo, Kali, Stop
- ʻO ka ʻike haʻahaʻa haʻahaʻa (LVD) me ka hoʻonohonoho hou ʻana a i ʻole ke hoʻopau ʻia, nā wahi huakaʻi koho
- ʻīlio kiaʻi me ke kumu wati kūʻokoʻa (WDOG)
- ʻO ka polokalamu hoʻopaʻa ʻia ʻana o ka hoʻopaʻa ʻana i ka pōʻaiapili (CRC)
- Uea debug interface (SWD)
- ʻEnekini manipulation bit (BME)
• Nā modula palekana a me ka pono
- 64-bit ka helu ʻike (ID) no kēlā me kēia chip
• Ke kuhi kanaka-mīkini
- A hiki i ka 57 kumu hoʻokomo / puka puka (GPIO)
- A hiki i ka 22 kumu hoʻokomo / puka puka (GPIO)
- A hiki i 14 kumu hoʻokomo / puka puka (GPIO)
- ʻElua a hiki i ka 8-bit keyboard interrupt modules (KBI)
- Hoʻopili waho (IRQ)
• Nā modula analog
- Hoʻokahi a hiki i ka 16-channel 12-bit SAR ADC, ka hana ma ke ʻano Stop, ka mea hoʻoiho hāmeʻa koho (ADC)
- ʻElua mau mea hoʻohālikelike analog i loaʻa kahi 6-bit DAC a me ka programmable reference input (ACMP)
• Nā hola manawa
- Hoʻokahi 6-channel FlexTimer/PWM (FTM)
– ʻElua 2-kanana FlexTimer/PWM (FTM)
- Hoʻokahi 2-channel manawa hoʻopau manawa (PIT)
- Hoʻokahi uaki manawa maoli (RTC)
• Nā pilina pili
- ʻElua mau modula SPI (SPI)
- A hiki i ʻekolu mau modula UART (UART)
- Hoʻokahi module I2C (I2C)
• Nā koho pūʻolo
– 64-pin LQFP
– 32-pin LQFP
