FS32K146HFT0VLHT ARM Nā mea hoʻoponopono liʻiliʻi MCU S32K146 M4F Flash 1M RAM 128KB

• Nā hiʻohiʻona hana
– Ka nui o ka uila: 2.7 V a 5.5 V
– Ka pae wela ambient: -40 °C i 105 °C noʻO ke ʻano HSRUN, -40 °C a i 150 °C no ke ʻano RUN

• Arm™ Cortex-M4F/M0+ kumu, 32-bit CPU
- Kākoʻo a hiki i ka 112 MHz alapine (HSRUN mode)me 1.25 Dhrystone MIPS no MHz
- Arm Core e pili ana i ka Armv7 Architecture aThumb®-2 ISA
– Hoʻohui ʻia ka hōʻailona hōʻailona kikohoʻe (DSP)
– Hoʻonohonoho ʻia ka mea hoʻoponopono hoʻopaneʻe vectored(NVIC)
– Hoʻokahi Precision Floating Point Unit (FPU)

• Nā pānaʻi uaki
- 4 - 40 MHz wikiwiki oscillator waho (SOSC) me ka piʻia hiki i ka 50 MHz DC ka uaki komo huinaha wahoʻano uaki waho
– 48 MHz wikiwiki i loko o ka RC oscillator (FIRC)
– 8 MHz Loko RC oscillator (SIRC)
– 128 kHz Haʻahaʻa Mana Oscillator (LPO)
– A hiki i ka 112 MHz (HSRUN) System Phased LockLoop (SPLL)
– A hiki i 20 MHz TCLK a me 25 MHz SWD_CLK
- 32 kHz ʻO ka uaki kūwaho manawa maoli(RTC_CLKIN)

• Hooponopono mana
– Mana haʻahaʻa lima Cortex-M4F/M0+ kumu meʻoi aku ka maikaʻi o ka ikehu
- Mana Mana Mana Mana (PMC) me ka nuinā ʻano mana: HSRUN, RUN, STOP, VLPR, a meVLPS.Nānā: CSEc (Security) a i ʻole EEPROM kākau/E hoʻomaka ka holoi ʻana i nā hae hewa ma ke ʻano HSRUN (112MHz) no ka mea ʻaʻole ʻae ʻia kēia hihia hoʻohanae hoʻokō i ka manawa like.Pono ka mea hanae hoʻololi i ka mode RUN (80 MHz) e hoʻokō i ka CSEc(Security) a i ʻole EEPROM kākau / holoi.
- Kākoʻo ʻia ka hana ʻana o ka mana haʻahaʻakikoʻī kikoʻī.

• Hoʻopili hoʻomanaʻo a me ka hoʻomanaʻo
- A hiki i ka 2 MB memo flash program me ECC
- 64 KB FlexNVM no ka hoʻomanaʻo flash data me ECCa me ka EEPROM emulate.Nānā: CSEc (Security) a i ʻoleE hoʻomaka ka EEPROM kākau / holoi i nā hae hewa i lokoʻO ke ʻano HSRUN (112 MHz) no ka mea ʻo kēia hihia hoʻohanaʻaʻole ʻae ʻia e hoʻokō i ka manawa like.ʻO ka mea hanapono e hoʻololi i ka mode RUN (80 MHz) ie hoʻokō i ka CSEc (Security) a i ʻole EEPROM kākau / holoi.
- A hiki i 256 KB SRAM me ECC
- A hiki i 4 KB o FlexRAM no ka hoʻohana ʻana e like me SRAM a i ʻoleEEPROM emulate
- A hiki i 4 KB Code cache e hōʻemi i ka hanaka hopena o ka loaʻa ʻana o ka hoʻomanaʻo
- QuadSPI me ke kākoʻo HyperBus ™

• hoailona huikau
- A hiki i ʻelua 12-bit Analog-to-Digital Converter(ADC) a hiki i ka 32 channel analog inputs no kēlā me kēiamodule
- Hoʻokahi Analog Comparator (CMP) me ka 8-bit kūlokoMea hoʻololi kikohoʻe i Analog (DAC)

• hana hoʻopololei
- Hoʻohui pū ʻia ʻo Serial Wire JTAG Debug Port (SWJ-DP).
- Debug Watchpoint and Trace (DWT)
– Mea Hoʻohana Trace Macrocell (ITM)
– Hoʻāʻo Port Interface Unit (TPIU)
- ʻĀpana Flash a me Breakpoint (FPB).

• ka pilina kanaka-mīkini (HMI)
- A hiki i 156 mau pine GPIO me ka hana keakea
– ʻAʻole-Maskable Interrupt (NMI)

• Nā pilina pili
- A hiki i ʻekolu mau modula Low Power Universal Asynchronous Receiver/Transmitter (LPUART/LIN) me ke kākoʻo DMAa me ka loaʻa haʻahaʻa mana
- A hiki i ʻekolu mau modules Low Power Serial Peripheral Interface (LPSPI) me ke kākoʻo DMA a me ka loaʻa ʻana o ka mana haʻahaʻa.
- A hiki i ʻelua mau modula Low Power Inter-Integrated Circuit (LPI2C) me ke kākoʻo DMA a me ka loaʻa ʻana o ka mana haʻahaʻa.
- A hiki i ʻekolu mau modula FlexCAN (me ke kākoʻo CAN-FD koho)
- Module FlexIO no ka hoʻohālikelike ʻana i nā protocol kamaʻilio a me nā peripheral (UART, I2C, SPI, I2S, LIN, PWM, etc.).
- A hiki i hoʻokahi 10/100Mbps Ethernet me ke kākoʻo IEEE1588 a me ʻelua mau modula Synchronous Audio Interface (SAI).

• Ka palekana a me ka palekana
- Hoʻokomo ʻo Cryptographic Services Engine (CSEc) i kahi pūʻulu piha o nā hana cryptographic e like me ka wehewehe ʻana i kaʻO SHE (Secure Hardware Extension) Nā kikoʻī hana.'Ōlelo Aʻo: CSEc (Security) a i ʻole EEPROM kākau / holoi i ka makemake
hoʻomaka i nā hae hewa ma ke ʻano HSRUN (112 MHz) no ka mea ʻaʻole ʻae ʻia kēia hihia hoʻohana e hoʻokō i ka manawa like.ʻO kapono e hoʻololi i ka mode RUN (80 MHz) no ka hoʻokō ʻana i ka CSEc (Security) a i ʻole EEPROM kākau / holoi.
- Helu 128-bit Unique Identification (ID).
- Kuhi hewa-hoʻoponopono (ECC) ma nā hoʻomanaʻo flash a me SRAM
– Pūnaehana Hoʻopalekana Pūnaehana (System MPU)
- ʻĀpana Hoʻopaʻa ʻia ʻo Cyclic Redundancy Check (CRC).
- ʻīlio kiaʻi kūloko (WDOG)
- Mākaʻikaʻi kiaʻi kiaʻi waho (EWM).

• Ka manawa a me ka mana
- A hiki i ʻewalu kūʻokoʻa 16-bit FlexTimers (FTM) modules, e hāʻawi ana i nā kahawai maʻamau 64 (IC/OC/PWM)
- Hoʻokahi 16-bit Low Power Timer (LPTMR) me ka mana ala ala maʻalahi
- ʻElua Papa Hoʻopaneʻe Programmable (PDB) me ka ʻōnaehana hoʻoiho maʻalahi
- Hoʻokahi 32-bit Low Power Interrupt Timer (LPIT) me 4 mau kahawai
- 32-bit ka helu manawa maoli (RTC)

• Pūʻolo
– 32-pin QFN, 48-pin LQFP, 64-pin LQFP, 100-pin LQFP, 100-pin MAPBGA, 144-pin LQFP, 176-pin LQFP pūʻolonā koho

• 16 channel DMA me ka 63 noi kumu me DMAMUX