FS32K116LFT0VLFT ARM Microcontrollers – MCU S32K116 32-bit MCU, ARM Cortex-M0+

• Nā hiʻohiʻona hana

– Ka nui o ka uila: 2.7 V a 5.5 V

– Ka wela wela: -40 °C a 105 °C no ke ano HSRUN, -40 °C a 150 °C no ke ano RUN

• Arm™ Cortex-M4F/M0+ kumu, 32-bit CPU

- Kākoʻo a hiki i ka 112 MHz alapine (HSRUN mode) me 1.25 Dhrystone MIPS ma MHz

- Arm Core e pili ana i ka Armv7 Architecture a me Thumb®-2 ISA

– Hoʻohui ʻia ka hōʻailona hōʻailona kikohoʻe (DSP)

- Hoʻonohonoho ʻia ka mea hoʻoponopono hoʻopaʻa hoʻopaʻa hoʻopaʻa ʻana i nā ʻāʻī (NVIC)

– Hoʻokahi Precision Floating Point Unit (FPU)

• Nā pānaʻi uaki

- 4 - 40 MHz wikiwiki oscillator waho (SOSC) a hiki i ka 50 MHz DC i waho o ka uaki hoʻokomo i waho i ke ʻano uaki waho.

– 48 MHz wikiwiki i loko o ka RC oscillator (FIRC)

– 8 MHz Loko RC oscillator (SIRC)

– 128 kHz Haʻahaʻa Mana Oscillator (LPO)

– A hiki i ka 112 MHz (HSRUN) System Phased Lock Loop (SPLL)

– A hiki i 20 MHz TCLK a me 25 MHz SWD_CLK

– 32 kHz Ka Uku Uku Manawa maoli (RTC_CLKIN)

• Hooponopono mana

- Mana Haʻahaʻa Arm Cortex-M4F/M0+ kumu me ka maikaʻi o ka ikehu

- Mana Mana Mana Mana (PMC) me nā mana mana he nui: HSRUN, RUN, STOP, VLPR, a me VLPS.'Ōlelo Aʻo: CSEc (Security) a i ʻole EEPROM kākau/ holoi e hoʻāla i nā hae hewa ma ke ʻano HSRUN (112 MHz) no ka mea ʻaʻole ʻae ʻia kēia hihia hoʻohana e hoʻokō i ka manawa like.Pono ka hāmeʻa e hoʻololi i ke ʻano RUN (80 MHz) no ka hoʻokō ʻana i ka CSEc (Security) a i ʻole EEPROM kākau / holoi.

- Kākoʻo ʻia ka hana haʻahaʻa haʻahaʻa ma nā peripheral kikoʻī.

• Hoʻopili hoʻomanaʻo a me ka hoʻomanaʻo

- A hiki i ka 2 MB memo flash program me ECC

- 64 KB FlexNVM no ka hoʻomanaʻo flash data me ka ECC a me EEPROM emulation.Hoʻomaopopo: CSEc (Security) a i ʻole EEPROM kākau / holoi ʻia e hoʻāla i nā hae hewa ma ke ʻano HSRUN (112 MHz) no ka mea ʻaʻole ʻae ʻia kēia hihia hoʻohana e hoʻokō i ka manawa like.Pono ka hāmeʻa e hoʻololi i ke ʻano RUN (80 MHz) no ka hoʻokō ʻana i ka CSEc (Security) a i ʻole EEPROM kākau / holoi.

- A hiki i 256 KB SRAM me ECC

- A hiki i ka 4 KB o FlexRAM no ka hoʻohana ʻana e like me SRAM a i ʻole EEPROM emulation

- A hiki i ka 4 KB Code cache e hōʻemi i ka hopena o ka hana o nā latencies hiki ke hoʻomanaʻo

- QuadSPI me ke kākoʻo HyperBus ™

• hoailona huikau

- A hiki i ʻelua 12-bit Analog-to-Digital Converter (ADC) a hiki i ka 32 channel analog inputs no kēlā me kēia module

- Hoʻokahi Analog Comparator (CMP) me 8-bit Digital to Analog Converter (DAC)

• hana hoʻopololei

- Hoʻohui pū ʻia ʻo Serial Wire JTAG Debug Port (SWJ-DP).

- Debug Watchpoint and Trace (DWT)

– Mea Hoʻohana Trace Macrocell (ITM)

– Hoʻāʻo Port Interface Unit (TPIU)

- ʻĀpana Flash a me Breakpoint (FPB).

• ka pilina kanaka-mīkini (HMI)

- A hiki i 156 mau pine GPIO me ka hana keakea

– ʻAʻole-Maskable Interrupt (NMI)

• Nā pilina pili

- A hiki i ʻekolu mau modula Low Power Universal Asynchronous Receiver/Transmitter (LPUART/LIN) me ke kākoʻo DMA a me ka loaʻa ʻana o ka mana haʻahaʻa.

- A hiki i ʻekolu mau modules Low Power Serial Peripheral Interface (LPSPI) me ke kākoʻo DMA a me ka loaʻa ʻana o ka mana haʻahaʻa.

- A hiki i ʻelua mau modula Low Power Inter-Integrated Circuit (LPI2C) me ke kākoʻo DMA a me ka loaʻa ʻana o ka mana haʻahaʻa.

- A hiki i ʻekolu mau modula FlexCAN (me ke kākoʻo CAN-FD koho)

- Module FlexIO no ka hoʻohālikelike ʻana i nā protocol kamaʻilio a me nā peripheral (UART, I2C, SPI, I2S, LIN, PWM, etc.).

- A hiki i hoʻokahi 10/100Mbps Ethernet me ke kākoʻo IEEE1588 a me ʻelua mau modula Synchronous Audio Interface (SAI).

• Ka palekana a me ka palekana

- Hoʻokomo ʻo Cryptographic Services Engine (CSEc) i kahi pūʻulu piha o nā hana cryptographic e like me ka wehewehe ʻana ma ka SHE (Secure Hardware Extension) Functional Specification.Hoʻomaopopo: CSEc (Security) a i ʻole EEPROM kākau / holoi ʻia e hoʻāla i nā hae hewa ma ke ʻano HSRUN (112 MHz) no ka mea ʻaʻole ʻae ʻia kēia hihia hoʻohana e hoʻokō i ka manawa like.Pono ka hāmeʻa e hoʻololi i ke ʻano RUN (80 MHz) no ka hoʻokō ʻana i ka CSEc (Security) a i ʻole EEPROM kākau / holoi.

- Helu 128-bit Unique Identification (ID).

- Kuhi hewa-hoʻoponopono (ECC) ma nā hoʻomanaʻo flash a me SRAM

– Pūnaehana Hoʻopalekana Pūnaehana (System MPU)

- ʻĀpana Hoʻopaʻa ʻia ʻo Cyclic Redundancy Check (CRC).

- ʻīlio kiaʻi kūloko (WDOG)

- Mākaʻikaʻi kiaʻi kiaʻi waho (EWM).

• Ka manawa a me ka mana

- A hiki i ʻewalu kūʻokoʻa 16-bit FlexTimers (FTM) modules, e hāʻawi ana i nā kahawai maʻamau 64 (IC/OC/PWM)

- Hoʻokahi 16-bit Low Power Timer (LPTMR) me ka mana ala ala maʻalahi

- ʻElua Papa Hoʻopaneʻe Programmable (PDB) me ka ʻōnaehana hoʻoiho maʻalahi

- Hoʻokahi 32-bit Low Power Interrupt Timer (LPIT) me 4 mau kahawai

- 32-bit ka helu manawa maoli (RTC)

• Pūʻolo

– 32-pin QFN, 48-pin LQFP, 64-pin LQFP, 100-pin LQFP, 100-pin MAPBGA, 144-pin LQFP, 176-pin LQFP nā koho

• 16 channel DMA me ka 63 noi kumu me DMAMUX