ATMEGA32A-AU 8-bit Microcontrollers – MCU 32KB In-system Flash 2.7V – 5.5V
Hōʻike huahana
| Huahana Huahana | Waiwai Hiʻona |
| Mea hana: | Microchip |
| Māhele Huahana: | 8-bit Microcontrollers - MCU |
| kumu: | AVR |
| Ka nui o ka hoʻomanaʻo papahana: | 32 kB |
| Nui ʻikepili RAM: | 2 kB |
| Pūʻolo / hihia: | TQFP-44 |
| Ka nui o ka uaki: | 16 MHz |
| Hoʻoholo ADC: | 10 bit |
| Ka helu o nā I/Os: | 32 I/O |
| Voltage Hoʻolako - Min: | 2.7 V |
| Voltage Hoʻolako - Max: | 5.5 V |
| Kāila kau ʻana: | SMD/SMT |
| ʻIkepili kaʻaahi laula: | 8 bit |
| Mahana hana liʻiliʻi loa: | - 40 C |
| ʻO ka wela hoʻohana kiʻekiʻe loa: | + 85 C |
| moʻo: | ATmega32A |
| Packaging: | pā |
| Brand: | ʻenehana Microchip |
| ʻAno RAM ʻikepili: | SRAM |
| Nui ʻikepili ROM: | 1024 B |
| ʻAno ROM ʻikepili: | EEPROM |
| Kiʻekiʻe: | 1 mm |
| ʻAno Interface: | 2-Uea, SPI, USART |
| Ka lōʻihi: | 10 mm |
| ʻAi ʻoluʻolu: | ʻAe |
| Ka helu o nā hola / helu: | 3 Ka manawa |
| Pūʻina hana: | megaAVR |
| Huahana: | Nā MCU |
| ʻAno Huahana: | 8-bit Microcontrollers - MCU |
| ʻAno hoʻomanaʻo papahana: | Flash |
| Ka nui o ka waihona hale hana: | 160 |
| Māhele ʻāpana: | Nā Microcontrollers - MCU |
| inoa kalepa: | AVR |
| laula: | 10 mm |
| Huina Wehe: | 0.048325 oz |
ATMEGA32A-AU
• Kiekie-hana, Haʻahaʻa-mana AVR® 8-bit Microcontroller
• Kūlana kiʻekiʻe RISC Architecture - 131 Mana Mana Mana - ʻO ka hapa nui o ka hoʻokō ʻana i ka pōʻai hoʻokahi - 32 × 8 Nā papa inoa hana maʻamau - Fully Static Operation - A hiki i 16MIPS Throughput ma 16MHz - On-chip 2-cycle Multiplier
• Nā ʻāpana hoʻomanaʻo hoʻomanawanui ʻaʻole hoʻoheheʻe - 32Kbytes o In-System Self-programmable Flash programme memory - 1024Bytes EEPROM - 2Kbytes SRAM kūloko - Kākau / holoi i nā pōʻai: 10,000 Flash / 100,000 EEPROM - Paʻa ʻikepili: 20 mau makahiki ma 80°C Māhele Code me nā ʻāpana Laka Kūʻokoʻa
• Ka Papahana In-System e ka On-chip Boot Program
• ʻOiaʻiʻo Heluhelu-While-Kākau Hana - Programming Lock no ka lako polokalamu palekana
• JTAG (IEEE std. 1149.1 Compliant) Interface – Boundary-scan Capabilities E like me ka JTAG Standard – Extensive On-chip Debug Support – Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
• Kākoʻo Hale Waihona Puke QTouch® – Nā pihi hoʻopā kaha, nā mea hoʻoheheʻe a me nā huila – Loaʻa iā QTouch a me QMatrix™ – A hiki i 64 mau ala manaʻo.
• Nā hiʻohiʻona ʻaoʻao - ʻElua 8-bit Timer / Counter me Separate Prescalers a hoʻohālikelike i nā ʻano - Hoʻokahi 16-bit Timer / Counter me Separate Prescaler, Compare Mode, a Capture Mode - Real Time Counter me Separate Oscillator - ʻEhā PWM Channels - 8-channel, 10-bit ADC
• 8 Kanal Hoʻokahi-hopena
• 7 mau ala like ʻole i loko o ka pūʻolo TQFP wale nō
• 2 Kanal Okoa me Programmable Gain ma 1x, 10x, or 200x – Byte-oriented Two-wire Serial Interface – Programmable Serial USART – Master/Slave SPI Serial Interface – Programmable Watchdog Timer me Separate On-chip Oscillator – On-chip Analog Comparator
• Nā hiʻohiʻona Microcontroller Kūikawā - Hoʻoponopono hou i ka mana a me ka ʻike ʻana i ka Brown-out Programmable - ʻO ka Oscillator RC Calibrated i loko - Nā Puna o waho a me loko - Nā ʻano moe ʻeono: Idle, ADC Noise Reduction, Power-save, Power-down, Standby and Extended Standby
• I/O a me nā pūʻolo – 32 Programmable I/O Lines – 40-pin PDIP, 44-lead TQFP, a me 44-pad QFN/MLF
• Nā Voltage Hana - 2.7V - 5.5V
• Māmā māmā – 0 – 16MHz
• Ka hoʻohana ʻana i ka mana ma 1MHz, 3V, 25°C – Hoʻoikaika: 0.6mA – Ke ʻano Idle: 0.2mA – Ke ʻano mana iho: <1µA
